Customization: | Available |
---|---|
After-sales Service: | 12 Months |
Warranty: | 12 Months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Technical Parameters Of Continuous Microwave Dryer Industrial Microwave Drying Machine | |||||
Model | Size L*W*H(Can be customized according to the customer's requirements) | Output power |
Dewaterability | Sterilization capacity |
Baking and Roasting capacity (Depends on different raw material) |
LY-10KW | 5000mm*825mm*1750mm | ≥10KW | 10KG/Hour | 100KG/Hour | 30-50KG/Hour |
LY-20KW | 8000mm*825mm*1750mm | ≥20KW | 20KG/Hour | 200KG/Hour | 60-100KG/Hour |
LY-30KW | 8500mm*1160mm*1750mm | ≥30KW | 30KG/Hour | 300KG/Hour | 90-150 KG/Hour |
LY-40KW | 10000mm*1160mm*1750mm | ≥40KW | 40KG/Hour | 40KG/Hour | 120-200KG/Hour |
LY-50KW | 12500mm*1160mm*1750mm | ≥50KW | 50KG/Hour | 500KG/Hour | 150-250KG/Hour |
LY-60KW | 13500mm*1450mm*1750mm | ≥60KW | 60KG/Hour | 600KG/Hour | 180-300KG/Hour |
LY-70KW | 13500mm*1500mm*1750mm | ≥70KW | 70KG/Hour | 700KG/Hour | 210-350KG/Hour |
LY-80KW | 13500mm*1650mm*1750mm | ≥80KW | 80KG/Hour | 800KG/Hour | 240-400KG/Hour |
LY-100KW | 16800mm*1650mm*1750mm | ≥100KW | 100KG/Hour | 1000KG/Hour | 300-500KG/Hour |
LY-150KW | 22400mm*1850mm*1750mm | ≥150KW | 150KG/Hour | 1500KG/Hour | 450-750KG/Hour |
LY-200KW | 27000mm*1850mm*1750mm | ≥250KW | 250KG/Hour | 2500KG/Hour | 750-1250/Hour |
LY-300KW | 32000mm*1850mm*1750mm | ≥300KW | 300KG/Hour | 3000KG/Hour | 900-1500KG/Hour |
Power Supply | 380V±10% 50Hz±1% Three-Phase Five-Wire | ||||
Microwave Output Frequency | 2450±50Mhz | ||||
Microwave Input Apparent Power | ≤168Kva | ||||
Microwave Output Power | ≥120Kw | ||||
Microwave Power Adjustment Range | 0-30Kw(Adjustable) | ||||
Ambient Temperature | -5-40°C | ||||
Relative Humidity | ≤80%, Surrounding Environment:No Corrosive Gas, Conductive Dust And Explosive Gas | ||||
Transmission Speed | 0-10m/Min(Adjustable) |
Operating Conditions | Industrial Microwave Dryer | Direct Fired Gas Dryer(Rotary Drum, Ring, Convection, Flash Types) |
Energy Source | Electricity | Gas |
Heat Penetration | Volumetric(Uniform Throughout | Surface To Interior Conduction |
Heating Rate | Nearly Instantaneous | Typically Slow |
Chemical Changes To Product | None | Carbonization, Maillard Reaction, Other |
Dryness Control/Consistency | Precision ,<1% Possible | Non-Precision,3-5%Typical |
Color Change To Product | None | May Darken* |
Nutrient loss in product | None | Possible |
Reliability | Very High | Poor To Moderate |
Labor Requirements | Minimal, Fully Automatic | Usually Requires Dedicated Operator |
Fire/Explosion Hazard* | None | Possible |
Energy Efficiency | ||
Overall Energy Efficiency | 75%+ | <50%** |
Heat Energy Delivered To Load | 95%+ | <50% |
Water Removal Energy | 1000 - 1200 Btu/ Lb | 1800-2400 Btu/b** |
4200-5600 | ||
2300-2800 Kj/Kg | Kj/Kg** | |
Emissions | ||
Control Equipment Required? | No | Yes |
Generates Vocs ? | No | Yes |
Generates Cox And Nox ? | No | Yes |
Generates Particulates ? | No | Yes |